Regulation

The notification process: the DIWASS era in EU plastic scrap imports and what notifications for 32 companies have taught us

Close-up of teal recycled plastic pellets with the Green Day logo

Key takeaways

  • Since 21 May 2026 every plastic scrap shipment from the EU to Türkiye requires notification (prior written notification and consent); not a single truck can leave without consent.
  • The European exporter submits the notification; the Turkish facility prepares licence, capacity, process and storage documents. The whole process runs through the EU's digital system, DIWASS.
  • Covered materials are clean, single-polymer plastics such as LDPE film, HDPE, PP, PET and PS. Türkiye banned imports of mixed plastic waste in 2026.
  • Green Day Trade has so far completed notifications for 32 companies; 4 notifications have been approved and 6 are at the consent stage.

21 May 2026 was a turning point for the plastic scrap trade between Europe and Türkiye. Until then, clean plastic scrap moved like any ordinary commercial good. Now a formal file is prepared for every shipment plan, consent from the competent authorities is required, and all communication runs through the EU's digital system, DIWASS. The process is called notification. So far Green Day Trade has completed notifications for 32 companies. In this article we walk through the process from start to finish, with what we have learned in the field.

Note: This article is for general information and is not legal advice. Regulations and practice may change; check the competent authorities' current requirements before every application.

Proud to share: where we stand on notification today

When the new rules took effect, many companies chose to wait. We started preparing early: we trained our team, built facility files in the format EU authorities expect and moved forward file by file with European exporters. As of November 2026:

32
Companies we have notified for
4
Approved notifications
6
Files at consent stage

These numbers mean a lot to us at a time when the system is new, authorities ask for more information on nearly every file and, by one estimate, only about a thousand notifications received full consent across the whole EU in the system's first four months. Our file count grows every day as we talk to our customers, and we expect the number of approved notifications to rise sharply in the new year.

What changed: before and after

Before 21 May 2026After 21 May 2026
Clean plastic scrap was "green list" waste.Plastic waste moved into the "prior notification and consent" procedure.
It shipped like a normal commercial good.A formal file is prepared for every shipment plan.
An information document (Annex VII) was enough.Consent from dispatch, transit and destination authorities is required.
No state consent was needed; documents were on paper.All documents run digitally through DIWASS.

An important distinction: plastic scrap imports into Türkiye have not been banned. As an OECD member, Türkiye is in the permitted group. The real ban applies to non-OECD countries and starts on 21 November 2026. We cover each OECD country in our OECD guide.

What is a notification?

A notification is a formal application to the competent authorities for permission to ship waste. In its simplest form it says: "I will take this waste from this company to this facility and recover it this way. Please give consent."

The application covers a shipment plan, not a single shipment. Consent is given for a set total quantity and a set period; within that period several shipments can be made up to the approved quantity. Each shipment is separately pre-notified with a movement document before it leaves.

Who does what?

PartyRole
European exporter (notifier)Submits the notification to its own country's competent authority, uploads the file to DIWASS and answers the authorities' questions.
Turkish recycling facility (consignee)Prepares licences, documents and forms; is a party to the contract as the facility carrying out recovery.
Authority of dispatchReviews the file, requests information where something is missing and decides.
Transit authoritiesJoin the consent if the goods pass through other countries.
Türkiye: Ministry of Environment, Urbanisation and Climate ChangeGives consent as the country of destination and applies Türkiye's own import conditions.

What goes into the file?

The backbone of a notification is the notification form known as Annex IA. It and its supporting documents cover:

  • Waste identification: Basel and OECD code, EU waste code (EWC), customs tariff code (HS) and description.
  • Quantity and timing: Total quantity, planned number of shipments and period.
  • Parties and route: Exporter, receiving facility, carriers, customs offices of exit and entry, and any transit countries.
  • Recovery: The receiving facility and the operation; for plastics recycling usually R3 (recycling of organic substances).
  • Contract and guarantee: The contract signed between exporter and consignee, and a financial guarantee and insurance securing completion of the shipment.

In our experience, the supporting documents requested from the facility are:

  • Environmental licence, waste importer certificate and capacity report
  • Process flow chart
  • Customer due diligence (CDD) and additional information forms
  • Photos of the facility and detailed videos of the plant in operation
  • Procedures showing that storage meets EU standards

Which products are used in notifications?

Most plastics shipped under notification are clean, single-polymer plastic waste destined for recycling, defined in the Basel Convention under entry B3011. Within the EU the equivalent code is EU3011. Mixed or contaminated plastics (Y48) are a separate, stricter category. Products and codes we see most often:

ProductTypical sourceHS codeCommon EU waste code
LDPE / LLDPE filmStretch wrap, bags, agricultural film3915.1015 01 02, 02 01 04, 19 12 04
HDPEBottles, canisters, crates, drums3915.1015 01 02, 19 12 04
PPCrates, big bags, caps, injection parts3915.9015 01 02, 07 02 13
PETBottles, flakes, trays3915.9015 01 02, 19 12 04
PS / EPSPackaging foam, containers3915.2015 01 02, 07 02 13
Post-industrial scrapIn-plant trimmings and rejects3915.xx07 02 13

Whether material is single-polymer and clean decides not only its price but also which procedure applies and how likely consent is. In Türkiye, imports of mixed plastic waste have been banned since 1 January 2026, so an accurate product description and the right codes are critical for notifications to Türkiye. For more on codes see our HS codes guide, and for polymer differences our PET, HDPE, LDPE and PP guide.

How the process works, step by step

  1. Documents: The Turkish facility prepares its licences, documents and forms.
  2. Contract and guarantee: Exporter and facility sign a contract; the financial guarantee and insurance are arranged.
  3. Submission: The European exporter submits the file to its own authority through DIWASS.
  4. Review and requests for information: The authority reviews the file and, if anything is missing or unclear, requests information through the system. In our experience nearly every file goes through at least one round.
  5. Consents: The country of dispatch, any transit countries and Türkiye give consent. Once the file is accepted as complete, authorities generally have 30 days to decide.
  6. Shipment: Goods move within the approved quantity and period; each shipment is pre-notified with a movement document.
  7. Receipt and recovery confirmation: The facility confirms receipt and completion of recovery through the system.

What is DIWASS, and how does it work in practice?

DIWASS (Digital Waste Shipment System) is the EU's digital system for waste shipments. Since 21 May 2026 notifications, consents and shipment documents run through it instead of on paper. It is built on the European Commission's TRACES platform (ENV-TRACES), and authorities' requests for information arrive there too.

The first months were not easy for anyone. European recycling federations said openly that technical problems in the system were slowing applications down. Links between some member states' national systems and DIWASS had glitches that were fixed with updates. As a result, the transition period allowing paper Annex VII documents has been extended. There is no transition for notifications: they all run through DIWASS.

From the field: In DIWASS even a small inconsistency in one field can send a file back. What shortens consent time most is having company names, addresses, quantities and codes identical across the invoice, contract, Annex and facility documents.

Where do other countries stand?

  • EU member states: Each competent authority processes applications at its own pace; some are fast, others more cautious. By one software provider's estimate, about a thousand notifications received full consent across the EU in the system's first four months, which shows how slowly the new system has settled in.
  • Türkiye: The EU's largest plastic waste buyer, receiving about 510,000 tonnes from the EU in 2025. In September 2026 the European Commission assessed plastic waste going to Türkiye; it acknowledged stronger legislation and enforcement and asked for more on transparency and implementation.
  • United Kingdom: Outside the EU but an OECD member, so it can receive EU plastic waste under notification. Its own pledge to ban exports to non-OECD countries has not yet become law.
  • Non-OECD countries: From 21 November 2026, EU plastic waste can no longer go to countries such as Malaysia, Indonesia, Vietnam and Thailand; the notification route is closed too. Most of these countries had already introduced their own import bans.

The Turkish side: two gates

For plastic scrap to come from the EU to Türkiye, two gates must open:

  1. Europe's notification consent: Consent from the authority of dispatch and Türkiye, through the DIWASS process.
  2. Türkiye's own import conditions: Only licensed facilities holding a waste importer certificate may import, within set limits; environmental checks are made on arrival, and mixed plastic waste imports are banned.

Goods do not arrive until both are complete. That is also why imports have slowed in practice since 21 May: not because of a ban, but because files are being prepared for the first time and the system is settling in.

Common mistakes

  • Company name, address or facility details written differently across documents
  • Product description not matching the chosen Basel code, EU waste code and HS code
  • Shipments that exceed the approved quantity or fall outside the consent period
  • An annual quantity out of proportion to the capacity report
  • Storage area, fire safety measures and waste acceptance procedure not documented
  • Late or incomplete answers to requests for information

Green Day Trade's notification process

We stand with both the Turkish facility and the European exporter at every step:

  • Pre-assessment: We review the facility's documents, capacity and intended material, and check them against Turkish and EU rules.
  • File preparation: We prepare licences, capacity report, process flow chart, CDD forms, photo and video records and storage procedures, complete and consistent with each other.
  • Coordination with the exporter: We hand the file to the European exporter who submits the notification and check that what goes into DIWASS matches the facility documents.
  • Requests for information: We answer authorities' questions quickly and completely.
  • Post-consent follow-up: We track the approved quantity and period load by load and check every shipment's documents.

The 32 companies we have completed notifications for are the clearest sign that the process works. If you are a facility that wants to start the notification process, or a European company that wants to ship plastic scrap to Türkiye, get in touch and let's prepare your file together.

Sources

News bulletin

The latest developments on notification and DIWASS. Last updated: 19 November 2026.

  • 25 November 2026: The European Commission and member states are expected to meet to discuss the future of Annex VII in DIWASS. (Riciclanews)
  • 21 November 2026: The ban on plastic waste exports to non-OECD countries begins, closing the notification route for those countries too; shipments to OECD countries, Türkiye included, continue under notification. (European Commission)
  • 11 November 2026: Because of technical problems with DIWASS, the transition period allowing paper Annex VII documents has been extended beyond 2026, as announced by Portugal's environment agency APA. There is still no transition for notifications, which all run through DIWASS. (EUWID)
  • 27 October 2026: Recycling Europe, representing the European recycling industry, asked for the DIWASS transition period to be extended to at least 1 July 2027, saying system problems were delaying notifications. (EUWID)
  • August 2026: DIWASS's first three-month performance report was published: a data-transmission error in Austria's link to the central system was fixed with the 23 July update, and document transfer with France's national system GISTRID ran into problems. (diwass.org)

Frequently asked questions

What is a notification?

It is a formal application to the competent authorities for permission to ship waste from one country to another. In short it says: I will take this waste from this company to this facility and recover it this way; please give consent.

Who submits the notification?

The European exporter, acting as the notifier, submits it to the competent authority of its own country and uploads the file to DIWASS. The receiving Turkish facility prepares the supporting documents and is a party to the contract.

How long is a consent valid?

Consent is given for a set total quantity and a set period, as a general rule up to one year. Several shipments can be made within that quantity and period. Each shipment is also pre-notified with a movement document.

What is DIWASS?

The Digital Waste Shipment System is the EU's digital system for waste shipments. Since 21 May 2026 notifications, consents and shipment documents run through it instead of on paper. It is built on the European Commission's TRACES platform.

Which plastics can come to Türkiye under notification?

Clean, single-polymer plastics destined for recycling, for example LDPE film, HDPE bottles and crates, PP, PET bottles and PS. Under Türkiye's own rules only facilities holding a waste importer certificate may import, and imports of mixed plastic waste are banned.

Contact form

Tell us about your material, we'll find the right match.

Describe the material you want to sell or buy, the volume and your expectations. Our team reviews every request and gets back to you.

  1. 01
    Send your request

    Material, volume and quality expectations.

  2. 02
    We match

    We identify a suitable supplier or buyer.

  3. 03
    We run the process

    We coordinate logistics and documents together.

Request type
Material

* Required fields